- Joined
- Jul 2, 2022
- Messages
- 210
- Reaction score
- 141
- Points
- 43
In cases when USB method will not work and SSH needs to be opened for NBT, UART interface for it can be used.
RX,TX and GND is marked in attached photo.
Serial configuration:
Commands to open SSH:
Reboot.
Connect to 169.254.199.99 using ssh / telnet client.
Login details
RX,TX and GND is marked in attached photo.
Serial configuration:
Code:
Baud rate = 115200 bps
Data bits = 8
Parity = None
Stop bits = 1
Flow Control = None
Commands to open SSH:
Code:
sysetshell
syset:> connect
syset:> login Diagnose
syset:> setk SYS_DEBUG=0x01
syset:> store
syset:> exit
Reboot.
Connect to 169.254.199.99 using ssh / telnet client.
Login details
Code:
root
ts&SK412
Attachments
-
1.4 MB Views: 23