NBT ID3

Q

qevalla

New member
Joined
Aug 19, 2024
Messages
13
Reaction score
1
Points
3
Hello,
I have a NBT unit (not EVO) and need to solve error SA_RSD while I try to flash with E-Sys, which I can't flash or read FSC.
I have already read emmc, unit is from Korea, so if someone has the emmc images for Korea version, I would try to fix it.
Manufacturer of emmc is Micron.

Thank you in advance!
 

Attachments

  • NBT emmc image.JPEG
    NBT emmc image.JPEG
    1.1 MB · Views: 12
I try to help you. And thats my question about Esys. It is important for NBT
 
Yeah I really appreciate. But many people are saying that need to fix emmc, which now I have read dumps from it but I dont know where can I find those dumps for Korea region. I have tried with E-Sys 3.27.1, 3.40-2 and I think E-Sys 3.30 but with all I had the same error, after it starts to flash, it just finishes in two minutes. Head unit works fine just navigation is greyed out.
If you tell me with a specific version of E-Sys, I would give it a try.
 
If you try with esys 3.30 it is good method. If you have a damaged hard drive you will also not be able to reflash the unit. Maybe you really have a damaged emmc.
 
After changing the region in the units from Korea and Japan, it is so that the Navi is gray. Did you use the patch to upload FSC Ece or US? If you need it, I will generate such a patch for you
 
Yeah, Im not sure how can I fix emmc if I dont have same dumps from for Korea. I dont know if I can compare with ECE dumps.
 
The unit was patched with hutool3 and after it was showing this error, which was unable to read FSC aswell.
Im not sure if it can be re-patched with Feature Installer. But I want first to try to fix emmc, because I have removed resistors and a transistor which I think I will have hard job to resolder them, because of their tiny size.
 
I think it worked, and It had the maps installed from ECE after was region conversion.
 
You must log in or register to reply here.
Top Bottom
Back