ISTA+ 4.50.40 Patched (WARNING Message REMOVED [EN-GB + GLOBAL]) [Torrent]

Ne0

Ne0

Well-known member
VIP
Joined
Jul 10, 2022
Messages
666
Reaction score
411
Points
63

ISTA+ 4.50.40 Patched (WARNING Message REMOVED [EN-GB + GLOBAL])​

Ready to use for Diag.
If you never launched ISTA+, you may need to install latest Microsoft Visual C++ Redistributable (x86 and x64) and .NET Framework runtime.
This release DOES NOT need "BMW Standard Tools" as prerequisite.

Downloaded archive has to be extracted in C:\EC-APPS\

Once extracted, to launch ISTA+, you have to execute REG file :
C:\EC-APPS\ISTA\ISTA_Reg_Fix_x64_Diag_Only.reg

If you want full programming :
You need to add SDP Full (psdzdata full)
This SDP Full "psdzdata" folder has to be extracted in C:\EC-APPS\ISTA\PSdZ\data_swi\
Then run REG file : ISTA_Reg_Fix_x64_Full.reg
Then copy ISTAGUI (in attachment) exe to location:
C:\EC-APPS\TesterGUI\bin\Release\ISTAGUI.exe (send shortcut to desktop)
Click to expand...


There is a script in Tools folder to switch between Ediabas 7.7 and 7.3 version.
If you uses ICOM or ENET interface, stick to Ediabas 7.7 (default).
Run the script if you use K+DCAN cable to switch to Ediabas 7.3.

This release has DisableRequirementCheck and FakeFSC features enabled.
- WARNING message about ISTA Launcher 1.51 / 4.51 at start removed
- WARNING ICOM A1 / A2 message when plugged removed.


Separate/additional languages can be downloaded below.

  • CZ
  • DE
  • US
  • FR
  • IT
  • PT
  • RU
To view the content, you need to Sign In or Register.
Click to expand...
 

Attachments

  • ISTA_4.50.40_EN_Diag.7z.torrent.zip
    31.1 KB · Views: 105
  • ISTAGUI.7z
    1.5 MB · Views: 130
Last edited:
  • Like
Reactions: seanjordan20, Ryan, damnoodle and 6 others
Ne0 said:

ISTA+ 4.50.40 Patched (WARNING Message REMOVED [EN-GB + GLOBAL])​

Ready to use for Diag.
If you never launched ISTA+, you may need to install latest Microsoft Visual C++ Redistributable (x86 and x64) and .NET Framework runtime.
This release DOES NOT need "BMW Standard Tools" as prerequisite.

Downloaded archive has to be extracted in C:\EC-APPS\

Once extracted, to launch ISTA+, you have to execute REG file :
C:\EC-APPS\ISTA\ISTA_Reg_Fix_x64_Diag_Only.reg




There is a script in Tools folder to switch between Ediabas 7.7 and 7.3 version.
If you uses ICOM or ENET interface, stick to Ediabas 7.7 (default).
Run the script if you use K+DCAN cable to switch to Ediabas 7.3.

This release has DisableRequirementCheck and FakeFSC features enabled.
- WARNING message about ISTA Launcher 1.51 / 4.51 at start removed
- WARNING ICOM A1 / A2 message when plugged removed.
Click to expand...
Thanks,
just a question: the license is for educational purpuse. There are some limitations? thanks
 
It was a full functionally ista or it doesnt have some funkctions like calculate control plan and others?
 
nofez said:
Thanks,
just a question: the license is for educational purpuse. There are some limitations? thanks
Click to expand...
No
kris-diag said:
It was a full functionally ista or it doesnt have some funkctions like calculate control plan and others?
Click to expand...
Fully, only is not included full flashing files - psdzdata full
 
Jaydennn96 said:
So does this mean we cannot use this for coding in modules like airbag Ecu?
Click to expand...
What you understand with coding?
Lite (which is here included) is for diagnostics and if you want to flash/update modules then you have to download psdzdata full (extracted data 300+ GB)
 
Added in the first post language pack link
  • CZ
  • DE
  • US
  • FR
  • IT
  • PT
  • RU
 
I can see my f11 appear with enet cable but when i click setup connection nothing is happening.

Could it be that the c++ installation is incorrect ?

I need ideas, i thought it might be my usb-c hub so i ordered a ethernet -> usb A cable just to be sure.
 
I have used it for G20,F30 and F10 diagnostics with enet cable without any problems.
You have configured like this?
1736708445712.png


When you see active connection - double click on the "connection/vin" and it should connect

1736708526347.png



papajonez1337 said:
i thought it might be my usb-c hub so i ordered a ethernet
Click to expand...
I doubt that it will be the case.
 
Ne0 said:
I have used it for G20,F30 and F10 diagnostics with enet cable without any problems.
You have configured like this?
View attachment 1241


When you see active connection - double click on the "connection/vin" and it should connect

View attachment 1242




I doubt that it will be the case.
Click to expand...
Okey my admin settings dont look the same but this is my config- it is the same.
1736709412279.pngThe issue is when i double click or click "set up connection" and then for a milisecond it appears and then just shuts down.

I think i investigate into the logs.
This hurt sines i have been a software engineer for 10 years haha
 
Admin said:
Both x86 and x64?
Click to expand...
Both for 2013 version. I dont have the 2015-2022 installed


I found something interesting in the logs.

Code: 
2025-01-10 20:35:13.382 WARNING [T] ISTA: [18] IVDDeviceService.Start() - This service can not be started. Dealernr:  - Outlet:
2025-01-10 20:35:13.386 INFO [T] ISTA: [18] xVM.xVM() - ctor called.
2025-01-10 20:35:13.386 INFO [T] ISTA: [18] 'method_not_set' - ISTA Activation succeeded
2025-01-10 20:35:13.386 INFO [T] ISTA: [18] ConfigSettings.StoreAndLogChangedValue() - Change configuration 'BMW.Rheingold.xVM.DebugLevel' from '' to '9'. But Origin is not set, so the source is unknown.
2025-01-10 20:35:13.386 INFO [T] ISTA: [18] xVM.xVM() - xVM.DebugLevel is 9
2025-01-10 20:35:13.552 INFO [T] ISTA: [11] ConnectionManagerHandler.DeviceServiceDevicesChanged() - Device with DevId (MY VIN) added
2025-01-10 20:35:18.596 INFO [T] ISTA: [21] ConfigSettings.StoreAndLogChangedValue() - Change configuration 'BMW.Rheingold.ApiMode.LogInterupters' from '' to 'False'. But Origin is not set, so the source is unknown.
2025-01-10 20:35:18.597 INFO [T] ISTA: [21] InteractionRequestModel.OnResponseRecived() - InteractionResponse was set to the model.
2025-01-10 20:35:18.598 INFO [T] ISTA: [21] InteractionConnectionManagerModel.OnResponseRecived() - InteractionConnectionManagerResponse was set to the model. Parameters:  Button = 'Connect'
2025-01-10 20:35:18.599 WARNING [T] ISTA: [18] IVDDeviceService.Stop() - This service was not running
2025-01-10 20:35:18.601 WARNING [T] ISTA: [11] VCIEnetHsfzService.ReceiveCallback - socket error: 10054 An existing connection was forcibly closed by the remote host
2025-01-10 20:35:18.603 INFO [T] ISTA: [11] VCIEnetDoIpService.ReceiveCallback - shut down during operation
2025-01-10 20:35:18.604 INFO [T] ISTA: [8] TaskFinished - ObjectDisposed
2025-01-10 20:35:18.604 INFO [T] ISTA: [11] TaskFinished - ObjectDisposed
2025-01-10 20:35:18.607 INFO [T] ISTA: [21] InteractionController.DeregisterInteraction() - A 'InteractionConnectionManagerModel' was deregistered.
2025-01-10 20:35:18.608 INFO [T] ISTA: [18] InteractionController.DeregisterInteraction() - A 'InteractionProgressModel' was deregistered.
2025-01-10 20:35:18.636 INFO [T] ISTA: [15] InteractionController.RegisterInteractionModel() - A 'InteractionProgressModel' was registered. Interaction Title: 'Ongoing background process (Powered by ISTA-Patcher)
([Free | Educational Purpose Only] cartechnology.co.uk)'
2025-01-10 20:35:18.641 INFO [T] ISTA: [15] WcfNavigationService.NavigateTo() - Navigate to tab 'VehicleInformation_VehicleDetails'

An existing connection was forcibly closed by the remote host, something wrong with my firewall settings ? or does the remote host mean my f11 from 2016 ?
 
Last edited by a moderator:
Hi Thank you so much. The language pack link is dead.

Greetings
 
Hey ! Thanks you for this link. The Separate/additional languages link is dead. When you have time, can you upload it again ? Thanks again !
 
Language link updated
Maybe someone can send me PL language db?
 
  • Like
Reactions: klex545
Admin said:
Try install prerequisites from older installer version : https://mega.nz/folder/ShQQmI6I#R3CHnzYWdctJg6TitMkl6A
And check if that solves the issue.

Yes, you are connecting to the car and host here is ZGW module.
Click to expand...
It all works now, i think it was the usb-c hub. It worked perfectly with the usb-a-to-ethernet cable i bought today.

I also created a batscript to toggle disable/enable the firewall each time i connect just to be sure.

cheers
 
  • Like
Reactions: Ryan
You must log in or register to reply here.
Top Bottom
Back