Dr. Gini B022 v22.4.0.5

Ne0

Active member
VIP
Joined
Jul 10, 2022
Messages
639
Reaction score
113
Points
43
Dr.Gini - B022 v22.4.0.5 patched version
This diagnostic software requires Ediabas properly installed and functional
with a communication interface ( ICOM, ICOM Next, ENET, PASSTHRU or K+DCAN )

1730401275848.png
 

Attachments

  • DrGini-B022-v22.4.0.5-patched.7z
    6.2 MB · Views: 20
  • Like
Reactions: frick
Hello,did you have any trick because not see my icom next even is ista and itoolradar see it?
 
Tried this and works fine
1730971375681.png



But you can also try to lock it via itool radar and configure ediabas with easyconnnect (or other configurator, manual edit) to work with icom via obd or most, then run gini and click connect interface. It should automatically read ediabas configuration state which you previously configured and connect it.
 
Last edited: